Flexible
Wet Polishing Pads
The faces of polishing pads are
designed with straight or curved slots, so they could be bent or
distorted freely. They are backed with loop Velcro so they could be
attached to any of backer pads very easy. They are used for fabrication
of marble, granite, ceramic, and other hard and fragile material, as
well as non-iron metal. They are widely used to polish stone, porcelain
profiles, tile floors, all kinds of table-boards and stone sculptures.
Their working layer thickness is
2.2mm, 3mm or 4mm
They are suitable for hand power
machines with the power is 750W to 1500W that run up to a speed of
2000-10000 rpm.
Flexible Polishing Pads attach to the
Flexible Backer pads are used for grinding profiles or concave or
convex surface as well as flat surface of stone, while attach to the
rigid backer pads are perfect for grinding a flat or level surface like
floor.
The process procedure: the operator
sticks the flex pad on a backer pads and screw into Arbor of a grinding
machine, and then brings to bear some pressure to the machine to grind
stone surface for five times come-and-go, at the same time, the
operator must infuses water into the backer pad continuously during the
operation.
Then, the operator should change a
finer pad. The grits of pads are from #50, #100, #200, #400, #800,
#1500, #3000, and #5000 to white/black buff in turn.According to the
stone's quality and operator's experience, it could be cut down or save
some positions of pads. White buff is used for light color stones and
black buff for dark color stones. Each of grit is easily distinguished
by different color of Velcro and the grit mark on the pad.
They are worked by water fed during
the operation, so they are also called wet pads.
GRIT
|
#50
|
#100
|
#200
|
#400
|
#800
|
#1500
|
#3000
|
#5000
|
BUFF
|
COLOR
|
BLUE
|
YELLOW
|
ORANGE
|
RED
|
DARK
GREEN
|
LIGHT
GREEN
|
COFFEE
|
WHITE
|
WHITE
|
GLOSSY
|
1
|
2
|
5
|
10
|
20
|
35
|
65
|
85
|
90
|
WATER
QUANTUM
|
MUCH
|
MUCH
|
MUCH
|
MIDDLE
|
FEW
|
FEW
|
FEW
|
FEW
|
FEW
|
Measly water is needed from #1500, to
#3000. For the buff, only less water is needed to wet the stone
surface. This would make more friction resistance, and enough
temperature on the surface of stone. Then stone surface is easily to be
wiped off because of intenerate caused by momentary high temperature.
But the stone couldn't be grinded by dry with too long time or it will
result in burning or pigmentation. If burning appears, the worker must
do work over again from #200 at least, and if the pigmentation appears,
it must be from #400.
Flexible
Dry Polishing Pads
Some special floors (e.g. hotel's
stone floorboard) are not allowed to work by wet, so the dry pads are
used. Ordinarily, the dry pads will not cause burning and pigmentation
because of using the special resin to make the surface of pads
intenerated and pealed off as well as to avoid too hot on the surface
of stone.
They are excellent for marble
polishing. They can be used by wet as well.
Flexible
Buff Pads
As the last position of pads or as
the last stage of the fabrication, these pads are designed to create a
deep glossy reflection mirror like on marble, terrazzo and granite.
Only a little water is necessary so the pads can work with heat and
water and a smooth finish surface would be done quickly.
The pads are made from tin oxide and
natural fibers and special bond that are heat compressed into a mould.
As there are no dangerous chemicals involved, the Buff Pads are
environmental safe and easy to use.
Flexible
Resin-Pregnant Diamond Metal Chips Polishing Pads
For improving the efficiency to
quickly remove stock and for increasing the Durable life of pad set
significantly, we creates resin-metal-bond polishing pads, available
from #30, #50, #100,#200 to #400, available both by wet and by dry.
They are made with pregnant diamond
metal chips with unique resin bond. They are heat compressed into a
mould.
This is a new kind of high capability
pads. They can be applied to excellent fabrication of marble, concrete
and granite . They are welcomed by our consumers with very much
interest.
Customer Logo printed is available on
request for volume order.
Flexible
Metal bond Polishing Pad
Sintered metal bonded with Rubber
backer pad backed applied to quickly remove stock. They are available
from #30, #50, #100,#200 to #400 .
Flexible
Electroplated of Diamond Polishing Pads
Electroplated of diamond crystals on
a flexible cloth with dot matrix or a special pattern, they are mainly
used for dry polishing. They are available from grit #60, #120, #200 to
#400 .
Convex
Polishing Pads
They are designed for polishing
curved or inner concave parts of countertops, furniture, sinks, and
cast stone. Available in 3".
Customer Logo printed is available on request
for volume order.
SKETCH MAP 》
|